GW Instek GSP-827 User Manual - Manual (Page 71)

2.7GHz Spectrum Analyzer Operation Manual
⎯ ⎯
70
Insert a point
0 99.5 -45.0 5 100.1 -45.0
1 99.7 -45.0 6 100.4 -45.0
2 99.9 -45.0 7 100.5 -45.0
3 99.9 -30.0
4 100.1 -30.0
When a new point is inserted at its current field, the temporary values of frequency and level are
automatically generated. Both new values are the average of ahead and followed points.
Enter the desired frequency. Take 100.3MHz as example here.
0 99.5 -45.0 5 100.1 -45.0
1 100.3 -45.0 6 100.4 -45.0
2 99.9 -45.0 7 100.5 -45.0
3 99.9 -30.0
4 100.1 -30.0
When the entry is completed, the table will sort itself immediately by the order of frequency. The
limit line is modified accordingly. Enter the Level value if it is necessary.
0 99.5 -45.0 5 100.3 -40.0
1 99.9 -45.0 6 100.4 -45.0
2 99.9 -30.0 7 100.5 -45.0
3 100.1 -30.0
4 100.1 -45.0
Limit Line
Edit Insert
0
1 2 3
7
6 5 4
8 9
. -
GHz
dBm
MHz
dBmV
kHz
dBuV
BK SP
Start:99.5MHz Stop:100.5MHz
VBW:100 kHz Center:100.0MHz Span:1.0MHz
Ref Lvl: -30.0 dBm
-30.0
-50.0
-70.0
-90.0
-110.0
SAT JAN 28, 2003 14:30:25
INT:REF
AMPL CAL Limit
Lower
Insert
Undo
Delete
Reutrn
Frequency Frequency Level Level
(dBm (dBm (MHz) (MHz)
0: 99.5 -45.0
1: 99.9 -45.0
2: 99.9 -30.0
3: 100.1 -30.0
4: 100.1 -45.0
5: 100.3 -40.0
Level:-45
6: 100.4 -45.0
7: 100.5 -45.0
1