AW Gear Meters EMO-3000 - Manual (Page 34)

EMO‐3000
Operation and Programming Manual
33
F3 = UNITS – pages UNITS through these choices:
 CCM
 OZM
 GPM
F4 = CHANNL – selects the channel to be programmed
F5 – enters the Meter and Units selected for the A input (pin 4)
F6 – enters the Meter and Units selected for the B input (pin 3)
Fluid Variables
3 – FLUID VARIABLES
View or edit PID‐FLUID VARIABLES for individual color tables.
PROGRAMMING FLUID VARIBLES CHANNEL XX
CURRENT FLUID NUMBER = XX
Press 1 for GAIN FACTOR = XXXX.
Press 2 for TOLERANCE = XXXX.
Press 3 for INITIAL KICK = XXXX.
F1 = ESC
F2 = FLD UP F3=FLD DN
F2 – pages you Up through the Fluid Numbers.
F3 – pages you Down through the Fluid Numbers.
1 – press to program GAIN for current fluid number
2 – press to program TOLERANCE for current fluid number
3 – press to program INITIAL KICK for current fluid number
The DM‐3000 then asks for the pass code: ENTER PASS CODE = XXXX. The code is 4146.
Key in the correct variable value and Enter with F6.
F1 ESC F2=CLR F6=ENT ++NUMBERS++