6 setup and configuration, Setup and configuration – LumaSense Technologies BoilerSpection-SD User Manual
Page 34
BoilerSpection HD/SD Manual
BoilerSpection Installation Guide 34
2. Connect the other end of the Ethernet cable to the Field Switch Enclosure (FSE). The FSE
includes an industrial Ethernet switch with a fiber optic port to link to the control room. The
fiber optic link can be up to 250m (820') to the Imaging Processor/Controller (IPC) server
located in the control room.
3. Route the fiber optic link from the FSE to the control room.
3.6 Setup and Configuration
The computer is provided preconfigured for your installation. However, the monitor and optional
remote access device locations should be determined prior to arrival. LumaSense Field Service
Engineers will make the final software configuration.
LumaSense has an experienced team of Field Service Engineers that will be available to support your
organization for on-site needs during installation, commissioning, and training. You can ask about
additional support services by contacting your local LumaSense Technologies representative or by
calling LumaSense at 1-800-631-0176 or 1-408-727-1600.