4 mounting the camera system, Mounting the camera system – LumaSense Technologies BoilerSpection-SD User Manual
Page 26
BoilerSpection HD/SD Manual
BoilerSpection Installation Guide 26
3.4 Mounting the Camera System
In this step, the system will be mounted and aimed. You will need to determine the proper
mounting angle of the retraction systems to the desired target locations. This can be undertaken
while the furnace is online (hot) or during an outage (cold), but the process will be easier if the
furnace is online.
Figure 17: Example Closed and Open Retraction System Mounting Angles
Note: The maximum angle possible from vertical and horizontal is +/- 15 degrees.
This manual is related to the following products: