LumaSense Technologies BoilerSpection-SD - Manual (Page 25)

BoilerSpection HD/SD Manual BoilerSpection Installation Guide 25
Figure 16: Example of properly mounted air filtration system
3.3 Preparing the Camera
3.3.1 Preparing the Camera for HD Systems
Mount the BoilerSpection camera to the retract device on the floor or catwalk near the selected
furnace wall mounting location. The retract device will need to be manually pulled to the fully
retracted position to allow the camera’s lens to slide into the retract device’s wall box sleeve and
the base of the camera to mate with the mounting bracket on the retraction slide.
3.3.2 Preparing the Camera for SD Systems
In the case of SD systems, the slide track block is integral to the SD camera enclosure and it slides
onto the rods.