LumaSense Technologies BoilerSpection-SD - Manual (Page 33)

BoilerSpection HD/SD Manual BoilerSpection Installation Guide 33
3.5.4 Network Connections
The Field Switch Enclosure (FSE) provides a central connection point for all communication cables
from the BoilerSpection cameras.
1. Connect an Ethernet (Cat-5 or Cat-6) cable through the ½-inch hole located at the rear of
the housing of the BoilerSpection HD camera system.
Figure 26: BoilerSpection HD Conduit Connection Holes
OR,
Connect an Ethernet (Cat-5 or Cat-6) cable to the network connection port located at the
rear of the housing of the BoilerSpection SD camera system (see Figure 27).
Figure 27: BoilerSpection SD Network Connection
Network Connection Hole