Condec DLR3110 - Manual (Page 71)

Options, Replacement Kits 67
11.0 Options, Replacement Kits
There are numerous replacement part numbers mentioned throughout manual that may be ordered.
ORION-2C and ORION-3A O-Ring Replacement Kit (data sheet # 65308)
• Fluorocarbon “Viton” (standard for ORION-3A)...........................................PN 55277
• Nitrile Buna-N (standard for ORION-2C)......................................................PN 58499
• Ethylene-Propylene.........................................................................................PN 58506
• Silicone ...........................................................................................................PN 58509
• Neoprene .........................................................................................................PN 58515
NOTE: A small coating of fluorinated Krytox grease, (PN 55593), should be applied to both sides of O-ring prior
to installation.
• Pressure Trap
100 PSI full scale ranges and below (data sheet # 58621) .............................PN 58487
250, 500, 1000 or 2500 PSI full scale range (data sheet # 58609) .................PN 58483
5000 or 10000 PSI full scale range (data sheet # 58596) ...............................PN 58478
• Test Port (output) quick-disconnect male hose fitting
100 PSI full scale ranges and below ..............................................................PN 60195
250, 500, 1000 or 2500 PSI full scale range ...................................................PN 55394
5000 or 10000 PSI full scale range .................................................................PN 55542
Test Port (output) hose, with quick-disconnect male fitting:
• 100 PSI full scale ranges and below 5’ long............ .......................................PN 60195, 55251 (1 each)
• 250, 500, 1000 or 2500 PSI full scale range 5' long ......................................PN 55279
• 250, 500, 1000 or 2500 PSI full scale range 10' long .....................................PN 55300
• 250, 500, 1000 or 2500 PSI full scale range 15' long .....................................PN 55304
• 250, 500, 1000 or 2500 PSI full scale range 20' long .....................................PN 55310
• 5000 or 10000 PSI full scale range 5' long ....................................................PN 55280
NOTE: Model may be ordered with Test Port mounted on rear of unit for additional charge.