Condec DLR3110 - Manual (Page 34)

30 DLR3110 Rack Mount Digital Pressure Calibrator Manual
5.13.7 Time and Date Set-Up Menu
Table 5-19 outlines the Time and Date Set-Up menu parameters of the DLR3110.
NOTE: Setting the time is performed in the 24 hour clock mode for both 12 and 24 HOUR selections.
5.13.8 Input Set-Up
Table 5-20 outlines the parameters of the Input Set-up menu.
LED Display Alpha-Numeric Display Key Pressed Remarks
SET-UP TIME&D ? YES key Enters Time and Date menu
T STANDARD UP or DOWN
arrow
Press LEFT or RIGHT arrow keys to
change the current state of the selection.
STANDARD or DLS (Day Light Savings)
T 12 HOUR Press LEFT or RIGHT arrow keys to
change the current state of the selection.
12 HOUR or 24 HOUR
T 6:29 PM See Section 5.7 on page 19.
DATE MM/DD/YY Press LEFT or RIGHT arrow keys to
change the current state of the selection.
MM/DD/YY or DD/MM/YY
DATE 10/04/00 See Section 5.7 on page 19.
DATE NUMBER NUMBER or LETTER (print-out format of
date)
PORT 1 EXIT ? YES key Return to menu SET-UP/TIME&D ? See
Table 5-10 on page 24.
NO key Return to T/STANDARD.
Table 5-19. Time and Date Set-Up Menu
LED Display Alpha-Numeric Display Key Pressed Remarks
SET-UP INPUT YES key —
INPUT.1 OFF UP or DOWN
arrow
Press LEFT or RIGHT arrow keys to
change the current state of the selection.
FREEZE, ZERO, TARE, PRINT or OFF
INPUT.2 OFF Press LEFT or RIGHT arrow keys to
change the current state of the selection.
FREEZE, ZERO, TARE, PRINT or OFF
---- EXIT ? YES key Return to menu SET-UP/INPUT ?. See
Table 5-10 on page 24.
NO key Return to SET-UP/INPUT.1
Table 5-20. Input Set-Up Parameters