Condec DLR3110 - Manual (Page 26)

22 DLR3110 Rack Mount Digital Pressure Calibrator Manual
Figure 5-8. Conversion Set-Up Mode
5.12 Conversion Set-Up Mode Selection
To access Conversion mode see Section 5.4 on page 13. Press UP or DOWN arrow keys to step through
conversion selections. Press LEFT or RIGHT arrow keys to change the current state of the selected conversion.
The Conversion mode may be exited at anytime by pressing the CE key. If the CE key is pressed, the prompt Exit?
YES or NO scrolls continuously until the YES or NO key is pressed.
The following is a list of the available conversions as they appear on the alpha-numeric display:
• PSI
• KPa
• mmHG 0 • C
• BAR
• inHg0 • C
• mBAR
• cmH
2
O
• kg/cm 2
• inH
2
O68F
• inH
2
O4
•
C
• ftseaH
2
O
• TORR
• metrsH
2
O
• PASCAL
• mmH
2
O4 • C
The following is a list of the inoperative conversions (allocated for future use) as they appear on the
alpha-numeric display:
• CONV.SP1
• CONV.SP2
• CONV.SP1
• CONV.SP2
CONV ?
ZERO DISPLAY TARE PRINT
YES NO
CE ENTER