Brocade Fabric Watch Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 99)

Fabric Watch Configuration Using Web Tools
● Using Web Tools to configure Fabric Watch...................................................................99
● Fabric Watch threshold configuration using Web Tools................................................101
● Configuring alarms for FRUs using Web Tools.............................................................103
● Configuring alarm filters using Web Tools.................................................................... 104
● Fabric Watch alarm information.................................................................................... 104
● E-mail notification using Web Tools.............................................................................. 105
Using Web Tools to configure Fabric Watch
Enter a short description of your concept here (optional).
You can use Web Tools to define the following Fabric Watch configurations:
• Configure custom threshold values on particular elements.
• Place limits on the acceptable values of those elements and enable the custom limits (configure
threshold boundaries).
• Configure Fabric Watch to alert you to errant values.
• Configure Fabric Watch to identify unacceptable values (threshold traits).
NOTE
You do not need the Enhanced Group Management (EGM) license to perform Fabric Watch operations
using Web Tools.
Opening the Fabric Watch window
To open the Fabric Watch window, perform the following steps:
1. Select a switch from the Fabric Tree and log in if necessary.
2. Select Tasks > Manage > Fabric Watch.
The Fabric Watch window displays.
The figure below shows the Fabric Watch window.
NOTE
Unless the switch is a member of the current Admin Domain context, Fabric Watch is view-only.
Fabric Watch Administrators Guide 99
53-1003142-01