beautypg.com

Setting fabric watch custom and default values, E-mail notification configuration, Showing e-mail configuration information – Brocade Fabric Watch Administrators Guide (Supporting Fabric OS v7.3.0) User Manual

Page 43: Refer to

background image

Setting Fabric Watch custom and default values

Use the following commands to switch between custom and default values. These commands reset all
thresholds for all classes:

fwSetToCustom — Sets the boundary and alarm level to custom.
fwSetToDefault — Restores the boundary and alarm level to the default.

E-mail notification configuration

In environments where it is critical that you are notified about errors quickly, you can use e-mail
notifications. With e-mail notifications, you can be notified of serious errors by e-mail or a pager, so you
can react quickly.

To configure e-mail notifications in a Telnet session, perform the following steps:

1. Log in using Telnet or PuTTY.
2. Enter the fwMailCfg command at the prompt.
3. Enter the number from the mail configuration menu corresponding to the task you wish to perform.

The following shows the default response to the fwMailCfg command:

switch# fwMailCfg

1 : Show Mail Configuration Information

2 : Disable Email Alert

3 : Enable Email Alert

4 : Send Test Mail

5 : Set Recipient Mail Address for Email Alert

6 : Relay Host IP Configuration

7 : Quit

Select an item => : (1..7) [7]

Showing e-mail configuration information

1. Enter 1 in the fwMailCfg menu to view the current e-mail configuration classes.

The Config Show menu displays:

Config Show Menu

____________________________

1 : Environment class

2 : SFP class

3 : Port class

4 : Fabric class

5 : E_Port class

6 : F/FL Port (Optical) class

7 : Alpa Performance Monitor class

8 : End-to-End Performance Monitor class

9 : Filter Performance Monitor class

10 : Security class

11 : Resource class

12 : FRU class

13 : Quit

Select an item => : (1..13) [13]

The Config Show Menu lists each class for which you can provide a separate e-mail address.

2. Enter the number corresponding to the class for which the e-mail configuration should be displayed.

Setting Fabric Watch custom and default values

Fabric Watch Administrators Guide

43

53-1003142-01