Brocade Fabric Watch Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 73)

E_Port class default settings (Continued) TABLE 17
Area Description Default threshold settings Default alarm
settings
Threshold state
Invalid
transmission
words (ITW) Monitors the number of
invalid words transmitted. Unit: Errors
Time Base: minute
Low: 0
High: 1000
Buffer: 100
Below: 0
Above: 0
Informative
Out_of_range
Class 3 discards
(C3TX_TO) Class 3 discards frames
due to time-out or
destination unreachable. Unit: Errors Time
Base: minute
Low: 0
High: 5
Buffer: 0
Below: 0
Above: 0
Informative
Out_of_range
Link loss Monitors the number of link
failures. Unit: Errors
Time Base: minute
Low: 0
High: 500
Buffer: 50
Below: 0
Above: 0
Informative
Out_of_range
Signal loss Monitors the number of
signal loss errors. Unit: Errors
Time Base: minute
Low: 0
High: 5
Buffer: 0
Below: 0
Above: 0
Informative
Out_of_range
Sync loss Monitors the number of
loss of synchronization
errors. Unit: Errors
Time Base: minute
Low: 0
High: 500
Buffer: 50
Below: 0
Above: 0
Informative
Out_of_range
Protocol errors
(PE) Monitors the number of
primitive sequence errors. Unit: Errors
Time Base: minute
Low: 0
High: 5
Buffer: 0
Below: 0
Above: 0
Informative
Out_of_range
Port Monitoring
Fabric Watch Administrators Guide 73
53-1003142-01