Brocade Fabric Watch Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 88)

NOTE
Fabric Watch no longer supports fan monitoring. Event Manager (EM) now manages fan monitoring
and the switch status is calculated based on the fan status reported by EM.
Environment class default settings for temperature TABLE 24
Switch Default threshold settings
Unit: Degrees Celsius
Default alarm settings Threshold state
Low High Buffer
Brocade 300 0 50 10 Below: 3
Above: 3
(Same setting for all
devices)
Out-of-range
Out-of-range
(Same setting for all
devices except
Brocade DCX-4S)
Brocade 5100 0 63 10
Brocade 5300 0 48 10
Brocade 6505 0 58 10
Brocade 6510 0 65 10
Brocade 6520 0 61 10
Brocade 7800 0 58 10
Brocade Encryption
Switch 0 63 10
Brocade VA-40FC 0 63 10
Brocade DCX 0 70 10
Brocade DCX-4S 0 75 10 Informative
Out-of-range
Resource class settings
The Resource class monitors flash memory. It calculates the amount of flash space consumed and
compares it to a defined threshold.
Resource class area
Configure the Resource class using the sysMonitor command.
Resource class settings
88 Fabric Watch Administrators Guide
53-1003142-01