Yokogawa Removable Chassis DX1000N - Manual (Page 9)

1-3
IM 04L41B01-04E
Overview and Basic Operations
1
2
3
App
Index
Operation Flow (operation guide)
This section briefly explains the operation to display the builder screen, then create
components, and finally display the execution screen. Here, the creation of digital
components is taken as an example.
Display the builder screen (see section 1.2)
1. Press DISP/ENTER and use any arrow keys to select the [CUSTOM DISPLAY].
2. Use any arrow keys to select one of the submenus, [INTERNAL 1] to [INTERNAL
3], and press DISP/ENTER.
The execution screen appears first.
3. Press FUNC to display the soft key menu, and press the Builder soft key.
The builder screen appears.
Execution screen Builder screen
Create Components (see section 1.4)
4. Press the TOOL BOX soft key and then press the DIGITAL soft key.
The digital component is selected.
5. Use the arrow key to specify the size of a digital component, and press DISP/ENTER
to confirm.
You may specify the size from the origin toward the lower right.
Origin
Display the Execution Screen (see section 1.13)
6. Press the RUN PNL soft key.
The execution screen appears. To go back to the builder screen, perform Operation 3.
Builder screen Execution screen
Operation completed
1.1 Overview