Yokogawa Removable Chassis DX1000N - Manual (Page 12)

1-6
IM 04L41B01-04E
1.3 Set Grid (Cursor Movement Interval)
Cursor moves at defined grid intervals. No grid appears on the screen.
Procedure
1. Press the GRID soft key.
The grid interval menu appears.
2. Press the soft key for a grid interval to be set.
You can move the cursor at the defined grid intervals.
Explanation
Range of Grid Setting
You can select the grid from 1, 5, 10, 20, and 50 dots.
Setting the upper left-hand corner of the builder screen as an origin, the grid is set at
defined dot intervals.
The cursor stops at the right-hand edge and bottom edge on the builder screen even
without a grid.
Origin
Immediately after changing the grid setting, the cursor may not be positioned on the grid.
In this case, press one of the left or right arrow keys once and then press one of the up
or down arrow keys to stop the cursor on the grid. (The same happens if you press the
up or down arrow keys first and then the left or right arrow keys.
Position right after the grid has been changed
Cursor position when you press the
down arrow key after pressing the
right arrow key