Yokogawa Removable Chassis DX1000N - Manual (Page 103)

App-6
IM 04L41B01-04E
Explanation
Channel 001 is assigned to component ID 0 and 3, channel 002 is assigned to ID 1 and 4,
and channel 003 is assigned to ID 2 and 5.
Pressing the right arrow key in the execution panel repeatedly changes the display
group number to 2, 3, 4, 1, 2, and so on. If you press the left arrow key, the display group
number changes in the reverse order.
If you press the right arrow key once, channel 4 is assigned to component ID 0 and 3,
channel 005 is assigned to ID 1 and 4, and channel 006 is assigned to component ID 2
and 5.
The switching of the display by setting the display group in step 5 is described in the
table below (the channel display changes from top to bottom.)
Switching of the channel display when pressing the right arrow key
Component ID:
0, 3, 9
Component
ID: 1, 4, 10
Component
ID: 2, 5, 11
When the display group is 1 001 002 003
004 005 006
007 008 009
010 011 012
When the display group is 2 004 005 006
007 008 009
010 011 012
001 002 003
When the display group is 3 007 008 009
010 011 012
001 002 003
004 005 006
When the display group is 4 010 011 012
001 002 003
004 005 006
007 008 009
Example of switch of screen display
Left and right
arrow keys
Left and right
arrow keys
Left and right arrow keys Left and right arrow keys
Group control 1 to 4 can be set. Use this for the 4-screen display on the DX2000.
Appendix 1 Example of Creating a Custom Display