Yokogawa Removable Chassis DX1000N - Manual (Page 30)

1-24
IM 04L41B01-04E
To Update an Edited Screen:
When editing the internal memory data displayed on the custom screen submenu, the
screen data is saved in the internal memory. But if editing data in an external storage
medium, if you attempt to move to another screen, a message appears.
For an explanation of data from internal and external storage media, see section 1.2.
After editing the [Create], or [EXTERNAL 1] through [EXTERNAL 25] screens, be sure to
update the screen. If you do not update the screen, the edited data will be lost.
Press the Update soft key after editing a screen.
If you try to go to another screen without updating, the above caution dialog appears. If you
want to update the screen, select “No” to go back to the builder screen being edited.
Operations which show the caution dialog
Operations Description
DISP/ENTER key Displays the screen menu
START key Memory start action/ start screen display
MENU key Displays the setting menu
FUNC key > system information soft key Displays the system information screen
FUNC key > network information soft key Displays the network information screen
FUNC key > text field soft key Displays the text field screen
Note
• The screen can be changed by using the communication commands or by using screen
change with the event action/start. However, screen data being edited will be lost.
• If any USB memory is inserted while a screen is being edited in external storage media (CF
card), the USB memory operation selection screen does not appear.
• While data is being edited on the builder screen, the following actions do not work:
• Automatic screen recovery
• Event action favorite key action
• FAVORITE key (shows error E157)
1.13 Other Operations