Yokogawa Removable Chassis DX1000N - Manual (Page 31)

2-1
IM 04L41B01-04E
Advanced Settings of Screen and Component
1
2
3
App
Index
2.1 Screen Attribute
This section shows you how to configure attributes associated with screen name, base
color and runtime menu.
Precedure
1. On the builder screen, place your cursor in an area where there is no component.
2. Press the PROPERTY soft key.
Screen attribute setting dialog appears.
3. Configure each attribute.
Explanation
The below table shows each setting item and description.
Attribute Description Default value
Screen name This attribute will be displayed in the status display on the
custom display screen. It will be displayed in the submenu of
the screen menu as well.
You can enter up to 16 one-byte characters.
Base color You can configure the background color of the screen.
Display components without any background color will be
filled with the color configured here.
The colors available are [Lightgray], [Lightblue], [L.orange],
[Aquamarin], [Darkgray], [Darkblue], [Darkgreen], [White], and
[Black]
Lightgray
Runtime menu You can choose to show or hide the soft key menu on the
execution screen by setting [On] or [Off] at this field.
Off
Soft key menu displayed on the execution screen
[SET PNL] Switch to [Builder screen].
[NO MENU] Temporarily hide the soft key menu.
Pressing the [ESC] key will show the soft
key menu again.
Status area Sets [On] or [Off] to indicate whether or not the status area
is displayed. When the status area is set to [Off], the screen
construction area becomes larger. See the figure below.
On
When the status area is [On] When the status area is [Off]
DX1000 (0,24)
DX2000 (0,40)
DX1000 (319,239)
DX2000 (639,479)
(0,0)
(0,0)
Screen
construction
area
Chapter 2 Advanced Settings of Screen and Component