Yokogawa Removable Chassis DX1000N - Manual (Page 76)

2-46
IM 04L41B01-04E
2.23 Attributes of Batch Group Number
Components
This component displays the batch group number for MultiBatch.
You can create this group name component if setting the status area to No display
eliminates the batch group number. When MultiBatch is Off, batch group number
components cannot be created and their attributes cannot be edited.
Component type
(See Section 1.4.) Status display
component
Overlap restriction
(See Section 1.4.) None Update
cycle
None
Parts of the component
Batch group number
Background
Vertical display
Attribute settings dialog box
(*)
* The Batch group no. will be displayed only when Multi batch (additional specification
/BT2) is valid.
List of Attributes
Attribute Description Default value
ID This number is automatically assigned to identify the
components.
0 to 79
Batch group no
only with additional
spec. /BT2
Sets the batch group number.
You can select a number from [1] to [6] for DX1000, [1]
to [12] for DX2000.
The batch group number will be displayed only when
Multi batch is valid.
1
Font Sets the font of the text label showing the batch group
number.
Select from [Font5], [Font6], [Font8], [Font12], or
[Font16].
Font 6(DX1000)
Font 8(DX2000)
Color Sets the color of the string showing the batch group
number.
You can select a color of: [Red], [Green, [Blue],
[B.violet], [Brown], [Orange], [Y.green], [Light blue],
[Violet], [Gray], [Lime], [Cyan], [Dark blue], [Yellow],
[Light gray], [Purple], [Pink], [L.brown], [L.green], [Dark
gray], [Olive], [Dark cyan], [S.green], [Black], [White],
or [Background color].
[Background color]: The base color set for the screen.
Black
Background color Sets a background color.
(The choices for the background color are the same as
those for Color, plus [None].)
None
Disp.in
BTOverview
When the displayed screen is in BTOverview mode,
sets [On] or [Off] to indicate whether or not to display
the batch group number.
On
Text label
arrangement
Sets the horizontal arrangement of the text label.
You can select [Center], [Left], or [Right]. Center
Gap Sets the gap between characters in a text label.
Can be set in the range from 0 to 15. 0
Continued on the next page