Yokogawa Removable Chassis DX1000N - Manual (Page 41)

2-11
IM 04L41B01-04E
Advanced Settings of Screen and Component
1
2
3
App
Index
Attribute Description Default value
Time grid display Sets [On] or [Off] to indicate whether or not the time is displayed.
When set to [Off], the [Time display] and [Time font] items cannot be
set.
On
Depend ID Set the ID number of the component on which this component is
dependent.
See Section 2.2.
None
Visible You can choose to show or hide this component by setting [On] or
[Off].
See Section 2.2.
On
Sync act See Section 2.2.
Note
• Depending on the display method, it may take time until the trend components in created
custom display screens are displayed. To reduce the time, do the following.
• If all channel display is turned On, turn it Off.
• If displayed data is compressed along the time axis, lower the compress ratio or reduce
the number of trend components.
• Arrange push button, communication input, and switch components so that they do not
overlap with trend components. If these components overlap with trend components,
cursor movement can be slowed when selecting those components in the execution
screen.
• If the compress ratio of a trend component is set to 2 or higher, the trend display
phenomenon below can occur. This results from the limited capacity of the internal memory,
and does not indicate a malfunction. The data is written to the internal memory.
Phenomenon: When switching to the screen containing the trend display, old waveforms are
erased and waveforms are displayed only part way through the data.
2.5 Attributes of Trend Components