Yokogawa Removable Chassis DX1000N - Manual (Page 54)

2-24
IM 04L41B01-04E
2.11 Attributes of Simple Digital Components
These components are associated with displaying digital values.
Component type
(See Section 1.4.) Channel assignment Overlap restriction
(See Section 1.4.) None Update
cycle
1 sec
Name of Each Component
Digital value
Simple digital display area (Frame: Sunken)
Attribute Setting Dialog
List of Attributes
Attribute Description Default value
ID Number automatically assigned for component identification 0 to 79
Channel no Set the channel number to be assigned. You can configure
this field when the group control is set to [None].
1
Font Set the character size of digital value. You can select
[Font 5], [Font 6], [Font 8], [Font 12], [Font 16], or [Font 32].
Font 6(DX1000)
Font 8(DX2000)
Color Set the color of digital value. Selectable from among
[Red], [Green], [Blue], [B.violet], [Brown], [Orange],
[Y.green], [Lightblue], [Violet], [Gray], [Lime], [Cyan],
[Darkblue], [Yellow], [Lightgray], [Purple], [Pink],
[L.brown], [L.green], [Darkgray], [Olive], [Darkcyan],
[S.green], [Black], [White], [BASE], and [Channel]..
Blue
Alarm color Set the color of digital value when the alarm is turned
on. Selectable from among [Red], [Green], [Blue],
[B.violet], [Brown], [Orange], [Y.green], [Lightblue],
[Violet], [Gray], [Lime], [Cyan], [Darkblue], [Yellow],
[Lightgray], [Purple], [Pink], [L.brown], [L.green],
[Darkgray], [Olive], [Darkcyan], [S.green], [Black],
[White], [BASE], [Channel], and [Alarm].
Alarm
Background color Set the fill color of digital value area. (Background colors
available are same as those listed in alarm color.)
BASE
BG transparent You can choose to make the background color
transparent by setting [On] or [Off].
BG color will become transparent when the simple
digital completely overlaps the trend display
components located underneath. This transparency
is invalid if the simple digital protrudes from the trend
display component.
Off
Frame Set the frame of a component. See page 2-2. None
Depend ID Set the ID number of the component on which this
component is dependent. See Section 2.2.
None
Visible You can choose to show or hide this component by
setting [On] or [Off]. See Section 2.2.
On
Group control Set the control status of group displayed.
See Section 1.11 and Section 2.2.
None
Gr.Ctrl order Set the control order of group displayed.
See Section 1.11 and Section 2.2.
1
Sync act See Section 2.2.