Yokogawa Removable Chassis DX1000N - Manual (Page 60)

2-30
IM 04L41B01-04E
2.14 Attributes of Alarm Indicator Components
These components are associated with displaying an alarm indicator.
Component type
(See Section 1.4.) Channel assignment Overlap restriction
(See Section 1.4.) None Update
cycle
1 sec
Name of Each Component
Alarm kind display
Alarm indictor display area
Attribute Setting Dialog
• Select [All] at the alarm
level field.
[Change] button appears.
Set the alarm color for each alarm level.
• Select the [Change] button.
Alarm color dialog box appears.
List of Attributes
Attribute Description Default value
ID Number automatically assigned for component identification. 0 to 79
Channel no Set the channel number to be assigned. You can
configure this field when the group control is set to [None].
1
Alarm level Sets the alarm level to be assigned. Selectable from
among [1], [2], [3], [4], and [All]. Selecting [All] allows
an alarm color to be set for each level.
1
Alarm color Sets the color when the alarm is on. Selectable from
among [Red], [Orange], [Lime], [Yellow], [Pink], [Black],
[White], and [Alarm].
Alarm
Color Sets the color used when the alarm is off. Selectable
from among [Red], [Orange], [Lime], [Yellow], [Pink],
[Black], and [White].
Lime
Alarm kind
display
Sets [On] or [Off] to indicate whether or not the alarm
type is displayed. Setting [On] displays the alarm type
(symbol) set for each alarm level.
On
Frame Sets the component frame.
See Section 2.2.
Raised
Depend ID Set the ID number of the component on which this
component is dependent. See Section 2.2.
None
Visible You can choose to show or hide this component by
setting [On] or [Off]. See Section 2.2. On
Group control Set the control status of the display group.
See Section 1.11 and Section 2.2.
None
Gr.Ctrl order Sets the registration order of the display group.
See Section 1.11 and Section 2.2.
1
Sync act See Section 2.2.