Yokogawa Removable Chassis DX1000N - Manual (Page 17)

1-11
IM 04L41B01-04E
Overview and Basic Operations
1
2
3
App
Index
1.5 Move Components
Procedure
1. Use the arrow key to place the cursor on the component which you want to
move.
2. Press the MOVE soft key.
The movement frame (the component frame becomes a dashed line: ) is displayed.
3. Use the arrow key to move the movement frame to the point where you want to
place a component.
4. Press DISP/ENTER.
The component moves to the specified point.
Explanation
Setting the upper left-hand corner as an origin, components move on the grid.
Components do not go over the builder screen (configuration area). Therefore, even if
you press the arrow key you may not be able to move the movement frame. In this case,
making grid intervals smaller will enable you to move the movement frame.