4 attributes of bar graph components, Attributes of bar graph components -7, App index – Yokogawa Removable Chassis DX1000N User Manual
Page 37
2-7
IM 04L41B01-04E
Advanced Settings of Screen and Component
1
2
3
App
Index
2.4 Attributes of Bar Graph Components
These components are associated with displaying a bar graph. You can display tag no.,
tag comment, channel no., span, unit, alarm display mark, and alarm set-point mark.
Component type
(See Section 1.4.)
Components for
channel assignment
Overlap restriction
(See Section 1.4.)
None
Update
cycle
1 sec.
Name of Each Component
Direction: Vertical
Direction: Horizontal
Digital value (only vertical)
Unit (only vertical)
Alarm set-point mark
Span value
Alarm display mark (only vertical)
Tag comment (only vertical) (Tag No.: On)
Tag / Channel No. (only vertical) (Tag No.: Off)
Tag No. / Channel No. (only vertical) (Tag No.: On)
Attribute Setting Dialog
When Tag No. is set to On, the following attribute setting dialogs appear.
List of Attributes
Attribute
Description
Default value
ID
Number automatically assigned for component
identification.
0 to 79
Channel no
Set the channel number to be assigned.
You can configure this field when the group control is
set to [None].
1
Channel font
Set the character size of Tag No., Tag, or Channel No.
When the Tag No. is set to On, it shows the Tag No. or
Channel No. When Tag No. is set to Off, it shows the
Tag or Channel No.
You can select [Font 5], [Font 6], [Font 8], [Font 12], or
[Font 16].
Note that this field will not be available when the
direction is set to [Horizon].
Font 6(DX1000)
Font 8(DX2000)
Continued on next page