Yokogawa Removable Chassis DX1000N - Manual (Page 35)

2-5
IM 04L41B01-04E
Advanced Settings of Screen and Component
1
2
3
App
Index
2.3 Attributes of Digital Components
These components are associated with displaying digital values. You can display digital
value, tag (tag no., tag comment, or channel no.), unit, and alarm display mark.
Component type
(See Section 1.4.) Channel assignment Overlap restriction
(See Section 1.4.) None Update
cycle
1 sec.
Name of Each Component
Unit
Alarm display mark
Digital value
Tag No. / Tag (Tag comment) / Channel No.
Attribute Setting Dialog
List of Attributes
Attribute Description Default value
ID Number automatically assigned for component
identification.
0 to 79
Channel no Set the channel number to be assigned.
You can configure this field when the group control is
set to [None].
1
Digital font Set the character size of digital value.
You can select [Font 5], [Font 6], [Font 8], [Font 12],
[Font 16], or [Font 32].
Font 8(DX1000)
Font 12(DX2000)
Channel font Set the character size of tag no., tag comment, and
channel no.
You can select [Font 5], [Font 6], [Font 8], [Font 12], or
[Font 16].
Font 6(DX1000)
Font 8(DX2000)
Unit font Set the character size of unit font.
You can select [Font 5], [Font 6], [Font 8], [Font 12], or
[Font 16]. Note that this field will not be available when
[Unit display] field is set to [Off].
Font 6(DX1000)
Font 8(DX2000)
2 Line display You can choose to display the character strings for
channel font in 2 lines by setting [On] or [Off].
Off
Alarm display You can choose to show or hide the alarm display mark
by setting [On] or [Off] at this field. The alarm display
mark corresponds to level 1, level 2, level 3, and level
4 respectively from the top. When alarm is set to [Off],
it is displayed in lime. When alarm is [On], it will be
displayed in a color configured for each level (red,
orange, yellow, or pink).
On
Continued on next page