Yokogawa Removable Chassis DX1000N - Manual (Page 40)

2-10
IM 04L41B01-04E
List of Attributes
Attribute Description Default value
ID Number automatically assigned for component identification. 84 to 87
Batch group no
only with additional
spec. /BT2
Set the batch group number. The batch number needs to be within
the range from [1] to number of Multi batch configured at the basic
settings.
The batch group number will be displayed only when Multi batch is
valid.
1
Group no Set the group number.
Multi batch Off
You can select a number from [1] to [10] for DX1000, [1] to [36] for
DX2000.
Multi batch On
You can select a number from [1] to [6] for DX1000, [1] to [12] for
DX2000.
1
Direction Set the direction of trend display. You can select [SET], [Horizon], or
[Vertical].
SET
Compress ratio Set the ratio of rendering 1 dot data.
You can select [1], [2], [4], [5], [6], [7], or [8]. 1
Wave area Set the ratio used for displaying a wave to the width of temporal axis
direction as 100%.
You can select [100], [90], [80], [70], [60], or [50].
100
Margin Sets whether or not to display a margin on both sides in the direction
of the span.
[On]: Margin of 3% of component width is added in the direction of
the span
[Off]: The margin is not displayed
Off
Change group Sets whether or not to switch the group display in the execution
panel when the left/right keys are pressed.
[On]: Display switched [Off]: Display not switched
On
Message mark
size
Set the size of message mark to be displayed. You can select either
[Small] or [Large]. Note that this field will not be available when
[Message display] field is set to [Off].
Large
Time/div font Set the character size of Time/div display. You can select either [Font
6] or [Font 8]. Note that this field will not be available when Time/div
display is set to [Off].
Font 6(DX1000)
Font 8(DX2000)
Time font Set the character size of GRID time display. You can select either
[Font 5] or [Font 6]. Note that this field will not be available when time
display is set to [Off].
Font 5
Time interval Sets the interval for displaying the time. It cannot be set when [Time
display] is [Off].
[EveryGrid]: Displays in all time grids
[Alternate]: Displays in every other time grid
Alternate
2nd span Sets [On] or [Off] to indicate whether the 2nd span is Valid or Invalid.
See section 2.2
Off
2nd span Lower Enter a value between 0% for the lower limit and 90% for the upper
limit, with the difference between the 2 spans being 10% or greater.
See section 2.2
0
2nd span Upper Enter a value between 10% for the lower limit and 100% for the
upper limit, with the difference between the 2 spans being 10% or
greater.
See section 2.2
100
Message display You can choose to show or hide the message mark by setting [On]
or [Off].
On
Time/div display You can choose to hide or show the Time/div display by setting [On]
or [Off].
On
Time display Sets [On] or [Off] to indicate whether or not the grid time is displayed. On
Scale grid display Sets [On] or [Off] to indicate whether or not the scale grid is
displayed. When [Time grid display] is [Off], the scale grid is
automatically set to [Off], and cannot be set.
On
Continued on next page
2.5 Attributes of Trend Components