Yokogawa Removable Chassis DX1000N - Manual (Page 72)

2-42
IM 04L41B01-04E
2.21 Attributes of Memory Bar Components
This component appears in the status area and shows the progress of memory sampling.
The width of the Memory bar component frame represents the file save interval (display
data) or data length (event data), and shows the remaining time for memory sampling.
Component type
(See Section 1.4.) Status display
component
Overlap restriction
(See Section 1.4.) None Update
cycle
1 sec
Parts of the component
File save interval (for display data),
or data length (for event data)
Background
Bar
Remaining memory sampling time
For event data, the status is displayed as a text label.
Attribute settings dialog box
(*)
* The Batch group no. will be displayed only when Multi batch (additional specification
/BT2) is valid.
List of Attributes
Attribute Description Default value
ID This number is automatically assigned to identify the
components.
0 to 79
Batch group no
only with additional
spec. /BT2
Sets the batch group number.
You can select a number from [1] to [6] for DX1000, [1]
to [12] for DX2000.
The batch group number will be displayed only when
Multi batch is valid.
1
Data type Select a data type of [Display] or [Event] to display in
the Memory bar. Note that this can only be selected
when the basic setting mode memory data type is set
to Event + display. If the data type is set to Display or
Event, it cannot be selected, and reverts to the data
type setting.
Display (or
Event when the
memory type
of Basic setting
mode is Event)
Direction Sets the direction of bar graphs.
You can set [Vertical] or [Horizontal]. The default
value differs depending on the vertical-to-horizontal
size ratio of the plotted component.
A [Vertical] bar expands vertically from bottom to top.
A [Horizontal] bar expands horizontally from left to
right.
Depends on the
vertical-to-
horizontal ratio
Vert≥Horiz: Vert
Vert
Rem. time display Sets [On] or [Off] to indicate whether or not to display
the remaining sampling time in the Rem. time display
Memory bar.
Off
Continued on the next page