Yokogawa Removable Chassis DX1000N - Manual (Page 13)

1-7
IM 04L41B01-04E
Overview and Basic Operations
1
2
3
App
Index
1.4 Create Components
For details of each component, see “Chapter 2. Advanced Settings of Screen and Component.”
Procedure
1. Use the arrow key to move the cursor to the point where you want to create components.
You may move the cursor after creating components.
2. Press the TOOL BOX soft key.
The soft key menu for each component appears.
3. Press the soft key for components to be created.
4. Use the arrow key to manipulate the component size frame and determine the size.
You may change the size after creating components.
• You can manipulate the component size frame only toward the llower-right corner from the origin.
You can adjust the component size
by changing the grid option.
Component size frame Origin
When you press the NO MENU
soft key, the menu show at the
bottom of the screen will be
hidden, which allows you to
see the drawing area of the
component.
5. Press DISP/ENTER.
Components are created.
Explanation
Number of Components Which Can be Created on One Screen
Limitations exist according to the component type. If you attempt to create components
exceeding the number of components which can be created, an error message will
appear to prevent you from creating components.
Error message: Cannot create object. The maximum allowed number was exceeded.
Number of components which can be created on one screen: See “ID number of
components” on pages 1 to 7.
Arrangement Order
Components are placed to the front in the order of creation time. The last created
component is placed in the foreground.