Watlow Series 97 - Manual (Page 6)

Setup Steps
The controller must be equipped for communications,
(97_ _ - _ _ _ U - _ _ _ _ or 97_ _ - _ _ _ R - _ _ _ _).
See Chapter Five, Chapter Six and the Appendix.
4 Set up communications.
Chapter Four explains the keys, displays and software
navigation.
Chapter Five explains features, such as alarms and con-
trol methods.
Chapter Six lists parameter descriptions, ranges,
Modbus numbers and other information.
3 Configure the controller for
your application.
See Chapter Three. 2 Wire the controller.
See Chapter Two. 1 Install the controller.
How to do it What to do
1 . 2 ■ O v e r v i e w Wa t l o w S e r i e s 9 7