Watlow Series 97 - Manual (Page 58)

NOTE: For more information about how parameter seetings affect the controller’s operation, see Chapter Five, Features.
Active: Always 19 r [none] [none] none (0)
[reLy] relay (1)
[Proc] process (4)
[`485] (6)
[`232] (7) [OTY4] Output 4
Hardware
Reads the output 4
hardware type.
Active: Always 18 r [none] [none] none (0)
[reLy] relay (1) [OTY3] Output 3
Hardware
Reads the output 3
hardware type.
Active: Always 17 r [none] [none] none (0)
[reLy] relay (1)
[`Ssr] solid-state
relay (2)
[``dc] dc (3)
[OTY2] Output 2
Hardware
Reads the output 2
hardware type.
Active: Always 16 r [reLy] [reLy] relay (1) [OTY1] Output 1
Hardware
Reads the output 1
hardware type.
Active: Always 4 r none 0.00 to 99.99 [`reu] Software Revision
Reads software
revision number.
Active: Always 3 r none 0 to 9999 [Soft] Software ID
Number
Reads the software
ID number.
Active: Always 2 r none 0 to 9999 [`Sn2] Serial Number 2
Reads the last four
digits of the serial
number.
Active: Always 1 r none 0 to 9999 [`Sn1] Serial Number 1
Reads the first four
digits of the serial
number.
6 . 1 8 ■ P a r a m e t e r s Wa t l o w S e r i e s 9 7
Factor
y Page / Diagnostics Menu
Display Parameter Range Default Modbus Conditions for
Address Parameters to Appear
read/write
[Ity2] Input 2 Hardware
Enabled
Enables the input 2
hardware.
none (0)
[Pret] Process Event
(5)
none 9 r Active: Always