Watlow Power Series Rev H - Manual (Page 64)

A . 1 0
I
A p p e n d i x Wa t l o w P o w e r S e r i e s
Ordering Information
(1528)
To order, complete the code number
to the right with the information below:
P C _ _ - _ _ _ _ - _ _ _ _
Power Series = Microprocessor-Based
Solid State Power Controller
Package Style
C = 65 to 250 Amps
Phase
1 = 1-phase
2 = 3-phase, 2-leg control (4 SCRs)
3 = 3-phase, 3-leg control (6 SCRs)
4 = 3-phase, 4-wire, wye connected load
8 = 2 single-phase zones (specify 01 or 03 for Custom)
9 = 3 single-phase zones (specify 01 or 03 for Custom)
Heater Diagnostics (includes current limit)
0 = None
1 = Heater Diagnostics (Current Limiting and Heater Bakeout
are only available on single-phase and 3-phase, 3-leg Controllers)
Output Amperage Rating
(See Amperage Chart below; insert code number here.)
Output Voltage Rating
A
= 24 to 120V~
B = 200 to 480V~
C = 200 to 600V~
Communications
0 = None
1 = EIA/TIA 232/485 communications, isolated (field selectable)
Feedback/Retransmit
0
= None
1 = Load current feedback (0 to 10V or 0 to 20mA scalable retransmit output)
(Must have heater diagnostics selected.)
Custom
00 = None
AA = No Watlow logo with agency approval marks
AB - ZZ = Custom, consult factory for options
01 = Select for PC8 or PC9 using single-phase power supply, Watlow logo
03 = Select for PC8 or PC9 using multi-phase power supply, Watlow logo
Amperage Chart @ 50°C (122°F)
2 Single Phase Zones 3 Single Phase Zones
Single Phase 3 Phase, 2-Leg 3 Phase, 3-Leg
Code Amperage Code Amperage Code Amperage
Non N20 100A N20 80A N20 65A
Fan Cooled N25 140A N25 105A N25 85A
N30 165A N30 120A N30 105A
F20 125A F20 120A F20 90A
Fan Cooled F25 200A F25 160A F25 140A
F30 250A F30 185A F30 155A
F35 250A F35 225A
NOTE: User documentation may be available in French, German, Spanish, Italian, and Dutch, as well as English. Check Watlow’s website
(www.watlow.com/) for availability.
NOTE: See semiconductor fuses and holders on pages 2.1 and 3.6.
IMPORTANT NOTES:
Phase Angle:
Phase angle and phase
angle with current limit
are available on single
phase, and 3 phase/3-leg
models only. To get
current limiting, you
must also order heater
diagnostics.
Heater Bakeout:
Heater bakeout is
available on single
phase, and 3 phase/3-leg
models with heater
diagnostics.