IEI Integration NANO-9452 v1.00 - Manual (Page 164)

NANO-9452 EPIC Motherboard
Page 146
6.5.3 Hard Disk Drives
Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs.
When the menu is opened, the HDDs connected to the system are listed as shown below:
1st Drive [HDD: PM-(part number)]
2nd Drive [HDD: PS-(part number)]
3rd Drive [HDD: SM-(part number)]
4th Drive [HDD: SM-(part number)]
NOTE:
Only the drives connected to the system are shown. For example, if only
two HDDs are connected only “1st Drive” and “2nd Drive” are listed.
The boot sequence from the available devices is selected. If the “1st Drive” option is
selected a list of available HDDs is shown. Select the first HDD the system boots from. If
the “1st Drive” is not used for booting this option may be disabled.