IEI Integration NANO-9452 v1.00 - Manual (Page 139)

NANO-9452 EPIC Motherboard
Page 121
Fan 3 PWM Control [070]
The Fan 3 PWM Control option can only be set if the CPU FAN Mode Setting option is
set to Manual Mode. Use the Fan 3 PWM Control option to select PWM duty cycle
control. The PWM duty cycle specifies the width of the modulated pulse. A high value
ensures a wide pulse and a low value ensures a narrow pulse. To select a value, select
the Fan 3 PWM Control option and enter a decimal number between 000 and 127. The
PWM Duty Cycle control range is specified below.
PWM Minimum Mode: 0
PWM Maximum Mode: 127
Hardware Health Monitoring
Use the Hardware Health Configuration menu (BIOS Menu 7) monitor system
environmental parameters. The following health parameters are monitored.
Temperature monitoring: The following system temperatures are monitored:
o CPU Temperature
o System Temperature
o PWM Temperature
Fan Speed Monitoring: The following system fan speeds are monitored:
o System FAN Speed
Voltage Monitoring: The following system voltages are monitored:
o CPU cCore
o +1.8V
o +3.30V
o +5.00V
o +12.0V
o 0.9V
o 1.5V
o 5VSB
o VBAT