IEI Integration NANO-9452 v1.00 - Manual (Page 144)

NANO-9452 EPIC Motherboard
Page 126
Restore on AC Power Loss [Power Off]
Use the Restore on AC Power Loss BIOS option to specify what state the system returns
to if there is a sudden loss of power to the system.
Power Off The system remains turned off
Power On (Default) The system turns on
Last State The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
Power Button Mode [On/Off]
Use the Power Button Mode BIOS to specify how the power button functions.
On/Off (Default) When the power button is pressed the system is either
turned on or off
Suspend When the power button is pressed the system goes into
suspend mode
Resume on Ring [Disabled]
Use the Resume on Ring BIOS option to enable activity on the RI (ring in) modem line to
rouse the system from a suspend or standby state. That is, the system will be roused by
an incoming call on a modem.
Disabled (Default) Wake event not generated by an incoming call
Enabled Wake event generated by an incoming call
Resume on PME# [Disabled]
Use the Resume on PME# BIOS option to enable activity on the PCI PME (power
management event) controller to rouse the system from a suspend or standby state.