IEI Integration NANO-9452 v1.00 - Manual (Page 156)

NANO-9452 EPIC Motherboard
Page 138
snooping to be enabled, this option should be disabled.
No/Enab
led
PCI devices are informed that an ISA based Graphics
device is installed in the system so the ISA based
Graphics card functions correctly. This does not
necessarily indicate a physical ISA adapter card. The
graphics chipset can be mounted on a PCI card. Always
check with the adapter card manual first, before
modifying the default settings in the BIOS.
PCI IDE BusMaster [Disabled]
Use the PCI IDE BusMaster BIOS option to enable or prevent PCI IDE busmastering.
Disabled D EFAULT Busmastering is prevented
No/Enab
led
IDE controller on the PCI local bus has mastering
capabilities
OffBoard PCI/ISA IDE Card [Auto]
Use the OffBoard PCI/ISA IDE Card BIOS option to select the OffBoard PCI/ISA IDE
Card.
Auto D EFAULT The location of the Off Board PCI IDE adapter card is
automatically detected by the AMIBIOS.
PCI Slot 1 PCI Slot 1 is selected as the location of the OffBoard
PCI IDE adapter card. Only select this slot if the
adapter card is installed in PCI Slot 1.
PCI Slot 2 PCI Slot 2 is selected as the location of the OffBoard
PCI IDE adapter card. Only select this slot if the
adapter card is installed in PCI Slot 2.