5 cf card installation, 5 cf c, Nstallation – IEI Integration NANO-LX v1.10 User Manual

Page 93

NANO-LX EPIC SBC

Step 4:

Open the SO-DIMM socket arms. Gently pull the arms of the SO-DIMM socket

out and push the rear of the SO-DIMM down. (See Figure 5-1)

Step 5:

Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into

place and secure the SO-DIMM in the socket.

Step 0:

5.5 CF Card Installation

NOTE:

The NANO-LX supports CF Type II card. For the complete

specifications of the supported CF cards please refer to Chapter 2.

To install the a CF Type II card onto the NANO-LX, please follow the steps below:

Step 1:

Locate the CF card socket. Place the NANO-LX on an anti-static pad with the

solder side facing up. Locate the CF card.

Step 2:

Align the CF card. Make sure the CF card is properly aligned with the CF

socket.

Step 3:

Insert the CF card. Gently insert the CF card into the socket making sure the

socket pins are properly inserted into the socket. See Figure 5-2.

Step 0:

Page 93