IEI Integration NANO-LX v1.10 - Manual (Page 112)

NANO-LX EPIC SBC
Figure 5-16: USB Connector
5.9.5 VGA Monitor Connection
The NANO-LX has a single female DB-15 connector on the external peripheral interface
panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor
to the NANO-LX, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
NANO-LX. See Figure 5-17.
Page 112