IEI Integration IMBA-Q454 v1.01 - Manual (Page 82)

IMBA-Q454-R10 User Manual
Page 82
4.6 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
ƒ Keyboard and mouse
ƒ Serial port devices
ƒ VGA screens
ƒ Parallel port devices
ƒ Ethernet connection
ƒ USB devices
ƒ Audio devices
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding IMBA-Q454-R10 external peripheral interface connector
making sure the pins are properly aligned.
4.6.1 Keyboard and Mouse
The IMBA-Q454-R10 has a dual PS/2 connector on the external peripheral interface panel.
The dual PS/2 connector is used to connect to a keyboard and mouse to the system.
Follow the steps below to connect a keyboard and mouse to the IMBA-Q454-R10.
Step 1: Locate the dual PS/2 connector. The location of the dual PS/2 connector is
shown in Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse
connector into the appropriate PS/2 connector on the external peripheral
interface connector. See
8
Figure 4-16. Step 0: