IEI Integration IMBA-Q454 v1.01 - Manual (Page 68)

IMBA-Q454-R10 User Manual
Page 68
4.3.2 Socket LGA775 CF-520 Cooling Kit Installation
WARNING:
It is strongly recommended that you DO NOT use the original heat
sink and cooler provided by Intel on the IMBA-Q454-R10.
The cooling kit includes a support bracket that is combined with the
heat sink mounted on the CPU to counterweigh and balance the load
on both sides of the PCB.
Figure 4-5: Cooling Kit
A Socket LGA775 CPU cooling kit shown in
8
Figure 4-5 can be purchased separately. The
cooling kit comprises a CPU heat sink and a cooling fan.
WARNING:
Do not wipe off (accidentally or otherwise) the pre-sprayed layer of
thermal paste on the bottom of the heat sink. The thermal paste
between the CPU and the heat sink is important for optimum heat
dissipation.
To install the cooling kit, follow the instructions below.
Step 1: Place the cooling kit onto the socket LGA775 CPU. Make sure the CPU
cable can be properly routed when the cooling kit is installed.