IEI Integration IMBA-Q454 v1.01 - Manual (Page 109)

IMBA-Q454-R10 User Manual
Page 109
The fan mode setting options are listed below.
Î
Full On Mode D EFAULT Fan is on all the time
Î
Automatic mode Fan is off when the temperature is low enough.
Parameters must be set by the user.
When the FAN Mode Setting option is in the Automatic Mode, the following parameters
can be set.
ƒ CPU Temp. Limit of OFF
ƒ CPU Temp. Limit of Start
ƒ CPU Fan Start PWM
ƒ PWM Slope
Î CPU Temp. Limit of OFF [000]
WARNING:
Setting this value too high may cause the fan to stop when the CPU is
at a high temperature and therefore cause the system to be damaged.
The CPU Temp. Limit of OFF option can only be set if the CPU FAN Mode Setting
option is set to Automatic Mode. Use the CPU Temp. Limit of OFF option to select the
CPU temperature at which the cooling fan should automatically turn off. To select a value,
select the CPU Temp. Limit of OFF option and enter a decimal number between 000 and
127. The temperature range is specified below.
ƒ Minimum Value: 0°C
ƒ Maximum Value: 127°C