IEI Integration IMBA-Q454 v1.01 - Manual (Page 191)

IMBA-Q454-R10 User Manual
Page 191
8.8 DIO Page
The IEI iSMM application monitors the current voltage of the digital input and digital output
and shows the information on the DIO Page (
988H
Figure 8-18). The digital output information
can be set and written to an internal register to control the state driven on the output pin.
Figure 8-18: DIO Page
8.8.1 GPO Information Setting
Follow the steps below to set the GPO.
Step 1: Click the DIO Page.
Step 2: Click the icon in the GPO Information section to change the output pin state.
( : voltage pull high) ( : voltage pull low)