IEI Integration IMBA-Q454 v1.01 - Manual (Page 183)

IMBA-Q454-R10 User Manual
Page 183
8.4.1 Refresh Time Setting
The iSMM refreshes the fan speed values according to the refresh time period set by the
user. Follow the steps below to set the refresh time:
Step 1: Click on the Fan Page tab.
Step 2: Entering a value beside the Refresh time (Sec) (
971H
Figure 8-8).
Step 3: Click apply (
972H
Figure 8-8). Step 0:
Figure 8-8: Fan Speed Refresh Time Setting
8.4.2 High Limit Value and Low Limit Value Setting
The high limit value and low limit value of each fan speed can be set by the user. When
the fan speed is greater than the high limit value or less than the low limit value, the fan
speed value shows in red. For example, the CPU fan speed (1920) shows in red in
973H
Figure 8-7 since the current CPU speed is lower than the low limit value (2000).
To set the high limit value or low limit value, follow the steps below.
Step 1: Double click a high limit value or a low limit value to enter the new value (
974H
Figure
8-9).
Figure 8-9: Fan Page – High Limit and Low Limit