beautypg.com

6 usb cable (four port), Figure 4-14: dual usb cable connection – IEI Integration IMBA-Q454 v1.01 User Manual

Page 80

background image

IMBA-Q454-R10 User Manual

Page 80

Step 3:

Insert the cable connectors

.

Once the cable connectors are properly aligned

with the USB connectors on the IMBA-Q454-R10, connect the cable connectors

to the on-board connectors. See

8

Figure 4-14.

Figure 4-14: Dual USB Cable Connection

Step 4:

Attach the bracket to the chassis. The USB 2.0 connectors are attached to a

bracket. To secure the bracket to the chassis please refer to the installation

instructions that came with the chassis.

Step 0:

4.5.6 USB Cable (Four Port)

Four port USB 2.0 cables can be separately purchased from IEI. To install a four port USB

cable onto the IMBA-Q454-R10, please follow the steps below.

See also other documents in the category IEI Integration Hardware: