IEI Integration IMBA-Q454 v1.01 User Manual
Page 134
IMBA-Q454-R10 User Manual
Page 134
Î
Disabled
D
EFAULT
Memory is not reserved for ISA expansion cards
Î
Enabled
Memory is reserved for ISA expansion cards
Î Initiate Graphic Adapter
Use the Initiate Graphic Adapter option to select the graphics controller used as the
primary boot device. Select either an integrated graphics controller (IGD) or a combination
of PCI graphics controller, a PCI express (PEG) controller or an IGD. Configuration
options are listed below:
IGD
PEG/IGD
PEG/PCI
D
EFAULT
PCI/PEG
PCI/IGD
Î IGD Graphics Mode Select [Enabled, 32 MB]
The IGD Graphics Mode Select option determines the amount of system memory that
can be used by the internal graphics device.
Î
Disabled,
Zero memory used by internal graphics device
Î
Enabled,
32 MB
D
EFAULT
32 MB of memory used by internal graphics device
Î
Enabled,
64 MB
64 MB of memory used by internal graphics device
Î
Enabled,
128 MB
128 MB of memory used by internal graphics
device
Î PEG Port [Enabled]
Use the PEG Port option to enable or disable the PCI Express port.
Î
Disabled
Installed PEG cards cannot function.
Î
Enabled D
EFAULT
PEG card functions normally.