IEI Integration IMBA-Q454 v1.01 - Manual (Page 122)

IMBA-Q454-R10 User Manual
Page 122
Î
Disabled Legacy USB support disabled
Î
Enabled D EFAULT Legacy USB support enabled
Î
Auto Legacy USB support disabled if no USB devices are
connected
Î USB 2.0 Controller [Enabled]
Use the USB 2.0 Controller BIOS option to enable or disable the USB 2.0 controller
Î
Disabled USB 2.0 controller disabled
Î
Enabled D EFAULT USB 2.0 controller enabled
Î USB2.0 Controller Mode [HiSpeed]
Use the USB2.0 Controller Mode option to set the speed of the USB2.0 controller.
Î
FullSpeed The controller is capable of operating at 12 Mb/s
Î
HiSpeed D EFAULT The controller is capable of operating at 480 Mb/s
5.4 PCI/PnP
Use the PCI/PnP menu (Error! Reference source not found.) to configure advanced PCI
and PnP settings.
WARNING:
Setting wrong values for the BIOS selections in the PCIPnP BIOS
menu may cause the system to malfunction.