IEI Integration IMBA-Q454 v1.01 - Manual (Page 62)

IMBA-Q454-R10 User Manual
Page 62
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
IMBA-Q454-R10 may result in permanent damage to IMBA-Q454-R10
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IMBA-Q454-R10. Dry climates are especially susceptible to ESD. It is
therefore critical to strictly adhere to the following anti-static precautions whenever the
IMBA-Q454-R10, or any other electrical component, is handled.
ƒ Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding:- Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: When configuring the IMBA-Q454-R10, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
IMBA-Q454-R10.
ƒ Only handle the edges of the PCB:-: When handling the PCB, hold the PCB
by the edges.