IEI Integration IMBA-Q454 v1.01 - Manual (Page 168)

IMBA-Q454-R10 User Manual
Page 168
7.1 Intel
®
AMT Setup Procedure
The IMBA-Q454-R10is featured with the Intel® Active Management Technology (AMT)
3.0. To enable the Intel® AMT function, follow the steps below.
Step 1: Make sure the DIMM1 socket is installed with one DDR2 DIMM.
Step 2: Connect an Ethernet cable to the RJ-45 connector labeled LAN2_USB23.
Step 3: The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,
including:
ƒ Intel® AMT Configuration [Advanced]
ƒ ME Subsystem Configuration [Advanced]
ƒ Configure the Intel® Management Engine BIOS extension (MEBx)
(see Section
945H
7.2 below)
Step 4: Properly install the Intel® AMT drives. Make sure to install both HECI and
LMS_SOL drivers from the iAMT Driver & Utility directory in the driver CD (see
Section
946H
6.8).
Step 5: The following dialog window is displayed after the OS is loaded to show the
Intel® AMT status on the IMBA-Q454-R10 is enabled. S te p 0 :
Figure 7-1: Intel® Active Management Technology Status Dialog
7.2 Intel
®
Management Engine BIOS Extension
This section describes the essential steps for using the Intel® Management Engine BIOS
extension (MEBx).