Figure 4-4: insert the socket lga775 cpu – IEI Integration IMBA-Q454 v1.01 User Manual

Page 67

IMBA-Q454-R10 User Manual

Page 67

Step 5:

Correctly position the CPU. Match the Pin 1 mark with the cut edge on the

CPU socket.

Step 6:

Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU.

Carefully match the two orientation notches on the CPU with the socket

alignment keys.

Step 7:

Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are

properly aligned, the CPU should slide into the CPU socket smoothly.

See

Figure 4-4.

Figure 4-4: Insert the Socket LGA775 CPU

Step 8:

Close the CPU socket. Close the load plate and engage the load lever by

pushing it back to its original position. Secure the load lever under the retention

tab on the side of CPU socket.

Step 9:

Connect the CPU 12 V cable to the 12 After the cooling kit is installed connect

the CPU cable to the CPU 12 V power connector.

Step 0: