IEI Integration IMBA-Q454 v1.01 - Manual (Page 106)

IMBA-Q454-R10 User Manual
Page 106
Î
ASK IR Serial Port 2 mode is ASK IR
Î Parallel Address [378]
The Parallel Port Address BIOS option assigns the I/O port address of the parallel port.
The following address options are available:
Î
Disabled No I/O port address is assigned to the parallel port
Î
378 D EFAULT Parallel Port I/O port address is 378
Î
278 Parallel Port I/O port address is 278
Î
3BC Parallel Port I/O port address is 3BC
Î Parallel Port Mode [Normal]
The Parallel Port Mode selection selects the mode the parallel port operates in.
Î
Normal D EFAULT The normal parallel port mode is the standard mode
for parallel port operation.
Î
EPP The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.
Î
ECP The parallel port operates in the extended
capabilities port (ECP) mode. The ECP mode
supports bi-directional communication between the
system and the parallel port device and the
transmission rates between the two are much faster
than the SPP mode.