Figure 7-2: intel® current me password – IEI Integration IMBA-Q454 v1.01 User Manual

Page 169

IMBA-Q454-R10 User Manual

Page 169

Step 1:

A screen prompts the user to press after a single beep during boot-up

process. To get into the Intel® MEBx settings, press <Ctrl+P>.

Step 2:

Enter the Intel® current ME password as required (

1049H947H

Figure 7-2). Enter the factory

default ME password: Abab12!@ (the Intel® default password is admin).

NOTE:

The default Intel® ME password is "admin". When the BIOS is cleared,

the password will reset to "admin".

Figure 7-2: Intel® Current ME Password

Step 3:

To change the password, select Change Intel® ME Password. Enter a new

password following the strong password rule (containing at least one upper case

letter, one lower case letter, one digit and one special character, and be at least

eight characters). (

1050H948H

Figure 7-3)